A mechanic pumps a handle a few times and a two-ton car slowly rises into the air. A driver presses the brake pedal with one foot and a moving vehicle comes to a stop. Neither situation involves superhuman strength. Both rely on a principle discovered in the seventeenth century by the French scientist Blaise Pascal. Pascal’s principle is a core topic in physics courses on fluids, and once you understand it, you start to see hydraulic systems everywhere. This article explains the principle, the equation behind hydraulic machines, a worked example and the most common mistakes students make.
A quick review of pressure
Pressure is the force applied perpendicular to a surface divided by the area of that surface:
P = F / A
In the International System of Units (SI), force is measured in newtons (N), area in square meters (m²) and pressure in pascals (Pa), where 1 Pa = 1 N/m². Yes, the unit is named after the same Pascal. You will also see pressure expressed in other units, such as pounds per square inch (psi), bar or atmospheres, so always check which unit a problem uses.
The definition already hints at something useful: the same force spread over a small area produces a high pressure, and the same pressure acting on a large area produces a large force.
What Pascal’s principle states
A change in pressure applied to an enclosed fluid at rest is transmitted undiminished to every part of the fluid and to the walls of its container.
Notice the word change. The fluid may already have different pressures at different depths because of its own weight. Pascal’s principle says that if you add a certain amount of pressure at one point, for example by pushing a piston, every other point in the fluid receives that same extra pressure.
This works so well with liquids because they are nearly incompressible. Their molecules are already packed closely together, so pushing on them barely reduces their volume. Instead of being absorbed, the push is passed along through the whole liquid.
The hydraulic press equation
The classic device built on this idea is the hydraulic press (or hydraulic lift). It has two cylinders of different sizes connected by a tube and filled with a liquid, usually oil. Each cylinder has a movable piston.
- You apply a force F₁ to the small piston, which has area A₁.
- This creates an added pressure P = F₁ / A₁ in the liquid.
- According to Pascal’s principle, the same added pressure reaches the large piston, with area A₂.
- The large piston experiences an upward force F₂ = P × A₂.
Because the pressure is the same on both sides, we get:
F₁ / A₁ = F₂ / A₂ or F₂ = F₁ × (A₂ / A₁)
The ratio A₂ / A₁ is the force multiplication factor. If the large piston has 40 times the area of the small one, the output force is 40 times the input force.
Worked example
A hydraulic lift has a small piston with a radius of 2 cm and a large piston with a radius of 20 cm. What force must be applied to the small piston to support a car weighing 15,000 N?
- Piston areas are circles, so A = πr². The ratio of areas is (20 / 2)² = 10² = 100.
- F₁ = F₂ / 100 = 15,000 N / 100 = 150 N.
A force of 150 N, roughly the weight of a 15 kg object, can hold up the car. Notice that we did not even need to calculate π: when both areas are circles, the ratio of areas equals the square of the ratio of radii (or diameters). Multiplying the radius by 10 multiplies the area, and therefore the force, by 100.
The catch: you pay with distance
A hydraulic press multiplies force, but it does not create energy. The volume of liquid pushed out of the small cylinder must equal the volume that enters the large one:
A₁ × d₁ = A₂ × d₂
In our example, to raise the car by 10 cm, the small piston would have to move 100 times farther: 10 meters. Real jacks solve this with many short pump strokes and one-way valves that stop the oil from flowing back. If you calculate the work on each side (force × distance), you find that it is the same, ignoring friction. Like a lever or a pulley system, a hydraulic machine trades a small force over a long distance for a large force over a short distance.
Why oil and not air?
Pascal’s principle applies to all fluids, including gases, but gases compress easily. In a system filled with air, part of every push would go into squeezing the gas instead of moving the other piston, making the system spongy and imprecise. That is why air bubbles in a car’s brake lines make the pedal feel soft, and why mechanics “bleed” the brakes to remove trapped air. Hydraulic oils also lubricate moving parts and help protect them from corrosion.
Pascal’s principle in everyday life
| Application | How it uses the principle |
|---|---|
| Hydraulic brakes | The pedal pushes a small master cylinder piston; pressure travels through the brake fluid to larger pistons at the wheels that press the brake pads. |
| Car jacks and garage lifts | Pumping a small piston gradually raises a large piston that supports the vehicle. |
| Construction equipment | Excavators, bulldozers and cranes move heavy arms and buckets with hydraulic cylinders. |
| Barber and dental chairs | A foot pump raises the chair and the person sitting in it with little effort. |
| Aircraft systems | Many airplanes use hydraulics to move control surfaces and landing gear. |
Common mistakes in problems
- Mixing units: both areas must be in the same unit. If one is in cm² and the other in m², convert first.
- Using radius instead of area: doubling the radius does not double the force; it quadruples it.
- Confusing mass and weight: if a problem gives a mass in kilograms, multiply by g (about 9.8 m/s²) to get the weight in newtons.
- Forgetting the distance trade-off: the larger piston always moves the shorter distance.
Conclusion
Pascal’s principle tells us that an enclosed liquid passes any added pressure to every point inside it. Combine that with P = F / A and you get machines that let a small push lift a car or stop a truck, always at the cost of extra distance. Master the relation F₁/A₁ = F₂/A₂, watch your units, and most fluid statics problems become straightforward. To keep building a solid foundation in mechanics, fluids and other core topics, explore the free Physics courses available on Cursa.



























