Hooke’s Law Explained: How Springs Stretch and How to Calculate Elastic Force

Learn Hooke’s Law: what the spring constant means, how to calculate force and stretch, how to read F–x graphs, and where the law stops working.

Share on Linkedin Share on WhatsApp

Estimated reading time: 7 minutes

Article image Hooke’s Law Explained: How Springs Stretch and How to Calculate Elastic Force

Stretch a rubber band, press the spring inside a ballpoint pen, or step on an old-fashioned bathroom scale, and you will notice the same thing: the object deforms and then pushes back, trying to return to its original shape. The rule that describes this behavior is Hooke’s Law, named after the English scientist Robert Hooke, who published it in the 17th century.

It is one of the simplest relationships in physics, yet it explains how spring scales, car suspensions and countless everyday mechanisms work. In this guide, you will learn what the law says, what each symbol means, how to solve typical problems, and where the law stops being valid.

What Hooke’s Law Says

Hooke’s Law states that, within a certain limit, the force needed to stretch or compress a spring is directly proportional to the distance it is stretched or compressed. Double the stretch and you need double the force. Triple the compression and the spring pushes back three times as hard.

In equation form:

F = k · x

You will often see it written as F = −k · x. The minus sign simply tells you that the spring’s restoring force points in the opposite direction to the displacement. Pull a spring to the right and it pulls to the left. When a problem only asks for the size of the force, you can ignore the sign.

What Each Symbol Means

SymbolQuantitySI unit
FElastic (restoring) forcenewton (N)
kSpring constant (stiffness)newtons per meter (N/m)
xExtension or compression from the spring’s natural lengthmeter (m)

A very common mistake is to use the total length of the spring as x. The variable x is the change in length. If a spring is 20 cm long at rest and 26 cm long when stretched, x is 6 cm, or 0.06 m.

Understanding the Spring Constant

The spring constant k tells you how stiff a spring is. A large k means you need a lot of force for a small stretch; a small k means the spring is easy to deform. The spring in a pen has a small k, while a car’s suspension spring has a much larger one.

The value of k depends on the spring itself, including:

  • the material it is made from;
  • the thickness of the wire;
  • the diameter of the coils;
  • the number of coils.

A handy way to read the unit: a spring with k = 200 N/m needs 200 N to stretch by one meter, or 2 N to stretch by one centimeter.

Reading a Force–Extension Graph

Because force and extension are proportional, a graph of F against x is a straight line through the origin. That graph hides two useful pieces of information:

  • The slope is the spring constant. Divide any force value by its matching extension: k = F / x.
  • The area under the line is the elastic potential energy stored in the spring. Since the shape is a triangle, the area is ½ × base × height, which gives E = ½ · k · x².

Notice that energy depends on the square of the extension. Stretch a spring twice as far and it stores four times as much energy.

Worked Examples

Example 1: Finding the force

A spring with k = 300 N/m is stretched by 5 cm. What force is required?

  1. Convert the extension to meters: 5 cm = 0.05 m.
  2. Apply the formula: F = k · x = 300 × 0.05.
  3. Answer: F = 15 N.

Example 2: Finding the spring constant

A 2 kg mass hangs from a vertical spring, which stretches by 10 cm and comes to rest. Use g = 9.8 m/s². What is k?

  1. At rest, the spring force balances the weight: F = m · g = 2 × 9.8 = 19.6 N.
  2. Convert the extension: 10 cm = 0.10 m.
  3. Rearrange: k = F / x = 19.6 / 0.10.
  4. Answer: k = 196 N/m.

Example 3: Stored energy

How much energy does a spring with k = 200 N/m store when compressed by 0.2 m?

E = ½ · k · x² = 0.5 × 200 × 0.04 = 4 J.

Springs in Series and in Parallel

When several springs work together, you can replace them with one “equivalent” spring. The rules are the reverse of those for electrical resistors:

ArrangementEquivalent constantEffect
Parallel (side by side)keq = k1 + k2 + …The system becomes stiffer
Series (end to end)1/keq = 1/k1 + 1/k2 + …The system becomes softer

For example, two identical 100 N/m springs in parallel act like a single 200 N/m spring. The same two springs in series act like a single 50 N/m spring.

Where Hooke’s Law Breaks Down

Proportionality only holds up to a point. Every material has an elastic limit. Below it, the object returns to its original shape when the force is removed. This is called elastic behavior.

Push beyond that limit and the spring undergoes permanent (plastic) deformation: it stays stretched even after you let go. Anyone who has overstretched a Slinky knows the result. Go further still and the material eventually breaks. That is why Hooke’s Law is best seen as an excellent approximation for small deformations, not a universal rule.

Hooke’s Law in Everyday Life

  • Spring scales and force meters: they measure force by how far a calibrated spring stretches.
  • Vehicle suspension: springs absorb bumps in the road.
  • Mattresses and furniture: coils spread body weight across a surface.
  • Mechanical devices: staplers, clothespins, retractable pens and wind-up toys store and release elastic energy.
  • Engineering: the same idea, extended to stress and strain, helps engineers predict how beams and materials respond to loads.

Quick Tips for Exams

  • Always convert centimeters to meters before using k in N/m.
  • Remember that x is the change in length, not the total length.
  • For a hanging mass at rest, spring force equals weight.
  • On an F–x graph, slope = k and area = stored energy.
  • Extension appears squared in the energy formula.

Conclusion

Hooke’s Law packs a lot of physics into a short equation, F = k · x. Once you understand what the spring constant represents, how to read a force–extension graph, and why the elastic limit matters, you can solve most spring problems with confidence and recognize the law at work all around you.

If you would like to keep building your understanding of forces, energy and motion, take a look at the free physics courses available on Cursa, where you can study at your own pace and earn a certificate.

The Bronze Age Collapse: When an Entire Interconnected World Fell Apart

Around 1200 BCE several Mediterranean civilisations collapsed within decades. Here is what happened, the leading explanations, and why it still matters.

Correlation Is Not Causation: How to Read a Data Chart Without Being Fooled

Two lines moving together rarely prove one caused the other. Learn the traps behind correlation and how analysts test for real causal links.

Sample Size and Margin of Error: How a Survey of 1,000 People Represents Millions

Why polling 1,000 people can describe a whole country, what margin of error really means, and how bad sampling ruins good statistics.

The Silk Road: How a Network of Trade Routes Connected the Ancient World

The Silk Road was never one road, and silk was only part of the story. A clear look at the routes, the goods, the ideas and why the network faded.

Why Steel Ships Float: Buoyancy and Archimedes’ Principle Explained

Density, displacement and pressure explain why a steel ship floats while a steel bolt sinks. A clear introduction to buoyancy for beginners.

The Pythagorean Theorem: What It Is and How to Use It

Learn what the Pythagorean theorem is, why it works, and how to use this essential geometry rule to find the sides of right triangles.

What Is Stoicism? A Beginner’s Guide to the Ancient Philosophy

Discover the core ideas of Stoicism, the philosophers behind it, and practical ways to apply its wisdom to daily life.

Why Every World Map Is Wrong: Map Projections Explained

Every flat map distorts the round Earth. Learn what map projections trade away, why Greenland looks huge, and how to read maps critically.