8.7. Installation of Window Air Conditioning Systems: Verification and Functional Testing

Installing a window air conditioner is a task that requires attention to detail and technical knowledge to ensure efficient and safe operation. In this guide, we are going to cover the verification and test operation steps after installing your window air conditioner.

Step 1: Check the physical installation

The first step after installation is to verify that the device has been installed correctly. The window air conditioner must be level and firmly secured in place to prevent excessive vibrations and noise. Make sure that all parts are properly secured and that there are no loose parts.

Also check that the water drainage is working properly. The drain pipe should be facing outside and in a location where water can easily drain without causing damage.

Step 2: Check the electrical installation

It is essential that the electrical installation is done correctly to avoid short circuits and other electrical problems. Check that the power cable is properly connected and that the mains voltage is compatible with that of the device.

Also, make sure that the circuit breaker or fuse used is suitable for the capacity of the air conditioner. If the breaker trips or the fuse blows frequently, this could indicate a problem with the electrical installation.

Step 3: Test the operation of the air conditioner

After verifying the physical and electrical installation, it is time to test the operation of the air conditioner. Turn on the device and see if it starts working normally. Check that cold air is being released and that the thermostat is working properly.

Test all the device's functions, such as the different operating modes (cooling, dehumidification, ventilation), fan speed and temperature control. Also check that the remote is working properly, if you have one.

Step 4: Check for noise and vibration

A window air conditioner will normally produce some noise and vibration, but these should not be excessive. If the device is very noisy or vibrating a lot, this could indicate a problem with the installation or the device itself.

Make sure the appliance is properly leveled and secured. If the noise or vibration persists, it may be necessary to call a technician to verify the problem.

Step 5: Check the performance of the air conditioner

Finally, make sure the air conditioner is cooling the room efficiently. This can take some time, especially on very hot days. If the appliance is not cooling the room adequately, it could indicate a problem with the appliance or the installation.

In summary, installing a window air conditioner is a task that requires care and attention to detail. After installation, it is important to check and test the operation of the device to ensure that it is working correctly and efficiently. If you have questions or problems, don't hesitate to call in a professional for help.